Oxy Fuel Welding / Brazing Additions
Introducing new additions to the XP brand of Parweld Filler Metal Consumables, with Brazing Flux Powders, Copper wire & Silver Solders, added to the Oxy Fuel range.
20/05/2026
Filler Metal Welding Consumables
Parweld offers an extensive range of welding consumables, engineered to deliver reliable performance, exceptional arc stability, and high-quality results across a wide variety of industrial and fabrication applications. From MIG/MAG and TIG wires to MMA electrodes, flux-cored wires, and specialised brazing alloys, every product is manufactured to rigorous standards to ensure optimal weld integrity, reduced spatter, and consistent feedability. Whether you are tackling heavy-duty structural steelwork, precision stainless steel fabrication, or routine maintenance repairs, Parweld provides the trusted, professional-grade filler metals and accessories needed to maximise productivity and keep your workshop running seamlessly.
Latest News On Parweld Consumables & Filler Metals
Tungsten Grinder
Portable Hand-Held Tungsten Electrode Grinder, with double-sided diamond grinding disc. For cleaner, efficient welds, reduced electrode waste and improved productivity.
10/06/2025
Weldiber
A global brand of everyday welding consumables by Parweld, Weldiber, established in Spain, offers exceptional value with high-quality standards.
15/03/2025
WIRE & RODS
MIG/MAG Wires
Engineered for superior feedability and arc stability in manual and automated setups. Manufactured with controlled wire diameter tolerances and low surface contamination to maximise tip life and deliver sound mechanical properties.
Cored Wires
Formulated to enhance productivity in heavy structural welding, repair, and field operations. Provides smooth slag detachability, minimal spatter, and deep penetration characteristics under gas-shielded or self-shielded conditions.
Flat/Horizontal:
- XP 308L-T0
- XP 309L-T0
- XP 316L-T0
All-Position:
- XP 308L-T1
- XP 309L-T1
- XP 316L-T1
Severe abrasion/corrosion resistant cobalt-base options:
- XP COBALT 1-G
- XP COBALT 6-G
- XP COBALT 12-G
- XP COBALT 21-G
Cored Wires
Formulated to enhance productivity in heavy structural welding, repair, and field operations. Provides smooth slag detachability, minimal spatter, and deep penetration characteristics under gas-shielded or self-shielded conditions.
TIG Rods/Wires
Double-stamped for end-to-end heat and batch traceability. Delivered in clean 1000mm tubes across high-specification alloys.
Built for critical heavy-duty work, structural integrity, and high-spec industrial fabrication. When every pass matters, Parweld XP delivers nuclear-grade reliability and pristine weld aesthetic.
WHY CHOOSE XP:
Ultra-Clean Wire Chemistry: Minimal spatter, superior arc stability, and exceptionally low hydrogen levels.
Flawless Feedability: Precision layer-winding reduces liner friction and torch wear.
Full Traceability: Fully certified batch testing for complete peace of mind for any application.
Best For: Aerospace, pressure vessels, offshore, structural steel, and high-stress alloys.
Engineered for workshop versatility, general fabrication, and high-volume daily production. Parweld WeldIber gets the job done cleanly without stretching your shop budget.
WHY CHOOSE WELDIBER:
Unbeatable Value: Experience the perfect balance of quality and affordability. WeldIber offers consumables with exceptional performance at a competitive price.
Cost-Effective Efficiency: Maximises deposition rates while keeping consumables costs low.
Full Traceability: Fully certified batch testing for complete peace of mind for any application.
Best For: General job shops, structural repair, agricultural maintenance, and daily manufacturing.
ELECTRODES
MMA Electrodes For Stick Welding Applications
Parweld XP branded MMA Electrodes, ideal for easy-striking sheet metal and steel work.
Tungsten Electrodes For TIG Welding Applications
THORIATED (2%)
Code: XPT1xxx
98% Tungsten and 2% Thorium
Suitable for DC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium.
PURE
Code: XPT2xxx
99.9% Tungsten
Suitable for AC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium.
LANTHANATED (1%)
Code: XPT3xxx
99% Tungsten and 1% Lanthanum
Suitable for DC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium.
LANTHANATED (1.5%)
Code: XPT4xxx
98.5% Tungsten and 1.5% Lanthanum
Suitable for DC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium.
LANTHANATED (2%)
Code: XPT5xxx
98% Tungsten and 2% Lanthanum
Suitable for DC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium.
ZIRCONIATED (0.8%)
Code: XPT6xxx
99.2% Tungsten and 0.8% Zirconium
Suitable for AC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium.
CERIATED (2%)
Code: XPT7xxx
98% Tungsten and 2% Cerium
Suitable for DC welding at low current. Can be used fully in AC processes.
3 ELEMENT (RARE EARTH)
Code: XPT8xxx
98.34% Tungsten, 1.5% Lanthanum, 0.08% Zirconium and 0.08% Yttrium.
Suitable for both AC and DC Welding.
Part Number Breakdown:
Example Product Code: XPT3240
XP
Consumable
Brand
T
Product Type
(Tungsten)
3
Tungsten
Type
24
Diameter in mm
(Value = Diameter x 10)
Length in mm
(Last Digit - 150 or 175)**
**Length Code: Standard tungsten electrode lengths are either 150mm or 175mm. The last digit in the product code represents the length format**
Tungsten Types:
- XPT 1 = THORIATED
- XPT 2 = PURE TUNGSTEN
- XPT 3 = 1% LANTHANATED
- XPT 4 = 1.5% LANTHANATED
- XPT 5 = 2% LANTHANATED
- XPT 6 = 0.8% ZIRCONIATED
- XPT 7 = 2% CERIATED
- XPT 8 = 3 ELEMENT (RARE EARTH)
- XPT 1 = THORIATED
- XPT 2 = PURE TUNGSTEN
- XPT 3 = 1% LANTHANATED
- XPT 4 = 1.5% LANTHANATED
- XPT 5 = 2% LANTHANATED
- XPT 6 = 0.8% ZIRCONIATED
- XPT 7 = 2% CERIATED
- XPT 8 = 3 ELEMENT (RARE EARTH)
Achieve flawless arc stability and flawless welds with the Parweld Portable Tungsten Grinder. Purpose-built for maximum accuracy and ultimate portability, this essential shop tool ensures perfectly ground, longitudinal angles on your electrodes every single time—eliminating arc wander and extending tungsten life.
Key Features:
Consistent Angle Precision: Pre-set head angles deliver accurate, repeatable tip geometry for superior arc control.
Dust Extraction Ready: Integrated collection keeps harmful dust contained, keeping your breathing zone and workspace clean.
On-the-Go Versatility: Lightweight and ergonomic, it is designed for effortless benchtop operation or quick field adjustments anywhere on site (standard plug-in and cordless battery-powered option available).
Extended Wheel Life: Premium double-sided diamond disc ensures smooth finishes and long-lasting performance across all electrode diameters.
Elevate your TIG setup and stop wasting time with manual bench-grinding. Pair your Parweld Tungsten Electrodes with the ultimate grinding solution today!
BRAZING & OXY-FUEL ACCESSORIES
Flux Powders
Engineered for precision and ease of use, these powders are designed to meet the rigorous standards of professional metalworkers across various industrial sectors by providing a highly stable chemical environment for superior joining. Each formulation in the XP range, from the low-temperature AG1 to the high-heat CU1, acts as a functional temperature indicator that transforms into a clear, liquid state to signal the exact moment for alloy application, effectively eliminating the guesswork that leads to metal distortion or joint failure.
XP Flux AG1
• Suitable For: General Brazing
• 530℃ - 780℃ Temperature Range
• Powder Form Type | 0.5kg NET Weight
• Ideal with the XP BRAZE Ag 140 and Ag 155.
• Classifications: EN ISO 18496 - FH10
• Code: XP50690
XP Flux AG3
• Suitable For: Sliver Brazing - High Temperature
• 600℃ - 1000℃ Temperature Range
• Powder Form Type | 0.5kg NET Weight
• Ideal with the XP BRAZE Ag 140 and Ag 155.
• Classifications: EN ISO 18496 - FH12
• Code: XP50691
XP Flux AL1
• Suitable For: Aluminium Brazing
• 520℃ - 630℃ Temperature Range
• Powder Form Type | 0.5kg NET Weight
• Classifications: EN ISO 18496 - FL20
• Code: XP50692
XP Flux AL2
• Suitable For: Aluminium Welding
• 590℃ - 660℃ Temperature Range
• Powder Form Type | 0.5kg NET Weight
• Classifications: EN ISO 18496 - FL20
• Code: XP50693
XP Flux CU1
• Suitable For: Copper Brazing
• 750℃ - 1030℃ Temperature Range
• Powder Form Type | 0.5kg NET Weight
• Ideal with the XP BRAZE Cu 470, Cu 773, CuP 179, CuP 182, CuP 279, CuP 281 and CuP 284.
• Classifications: EN ISO 18496 - FH21
• Code: XP50694
Silver Solders
Designed for the most demanding joining requirements, our Silver Solder range is engineered to provide exceptional bond strength and superior electrical conductivity across a wide array of dissimilar metals. These high-quality alloys are characterised by their narrow melting ranges and excellent flow properties, allowing for precision brazing in intricate assemblies where heat control is paramount. When used in conjunction with our XP Flux, these solders exhibit deep capillary penetration, creating ductile, corrosion-resistant joints that can withstand significant thermal cycling and mechanical stress.
XP BRAZE Ag 140
• Ag BRAZE 140 is a cadmium-free silver brazing alloy.
• Typically used on ferrous, non-ferrous, and dissimilar alloys for close capillary brazing, such as steel, stainless steel, copper,
and nickel-based alloys.
• Offers a low melting point and excellent flow characteristics.
• 650℃ (Solidus Melting) | 710℃ (Liquidus Melting) | ~720℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50603) | 2.0mm (XP50605)
• Suitable for use with the XP FLUX AG1 and AG3.
XP BRAZE Ag 140 FC
• Ag BRAZE 140 is a cadmium-free silver brazing alloy.
• Typically used on ferrous, non-ferrous, and dissimilar alloys for close capillary brazing, such as steel, stainless steel, copper,
and nickel-based alloys.
• Offers a low melting point and excellent flow characteristics.
• 650℃ (Solidus Melting) | 710℃ (Liquidus Melting) | ~720℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50608) | 2.0mm (XP50609)
• Flux/paste not required.
XP BRAZE Ag 155
• Ag BRAZE 155 is a cadmium-free silver brazing alloy.
• Typically used on ferrous, non-ferrous, and dissimilar alloys for close capillary brazing, such as steel, stainless steel, copper,
and nickel-based alloys.
• Offers a low melting point and excellent flow characteristics.
• 630℃ (Solidus Melting) | 660℃ (Liquidus Melting) | ~670℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50610) | 2.0mm (XP50615)
• Suitable for use with the XP FLUX AG1 and AG3.
XP BRAZE Ag 155 FC
• Ag BRAZE 155 is a cadmium-free, flux coated silver brazing alloy.
• Typically used on ferrous, non-ferrous, and dissimilar alloys for close capillary brazing, such as steel, stainless steel, copper,
and nickel-based alloys.
• Offers a low melting point and excellent flow characteristics.
• 630℃ (Solidus Melting) | 660℃ (Liquidus Melting) | ~670℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50630) | 2.0mm (XP50635)
• Flux/paste not required.
Copper Brazing
Engineered for high-performance thermal and electrical conductivity, making it the premier choice for applications requiring maximum efficiency in energy transfer. Designed and developed to provide a highly fluid melt pool with exceptional wetting characteristics, ensuring a clean, uniform bead that is both structurally sound and aesthetically superior. By maintaining a high purity level, the range offers excellent corrosion resistance and ductility, allowing joints to withstand the physical stresses of expansion and contraction without cracking.
XP BRAZE Cu 470
• Cu BRAZE 470 is a copper-zinc brazing alloy.
• Typically used on steel, nickel, and copper alloys specifically for brass and bronze welding applications.
• Due to the high zinc content, the heating cycle should be minimised to avoid zinc vaporisation.
• 875℃ (Solidus Melting) | 895℃ (Liquidus Melting) | ~910℃ (Recommended Brazing)*
• 1000mm Length | 2.5kg Weight | PAP 20 Tube Packaging
• Diameters = 1.6mm (XP50671) | 2.5mm (XP50672) | 3.0mm (XP50673)
• Suitable for use with the XP FLUX CU1.
XP BRAZE Cu 470 FC
• Cu BRAZE 470 is a copper-zinc, flux coated brazing alloy.
• Typically used on steel, nickel, and copper alloys specifically for brass and bronze welding applications.
• Due to the high zinc content, the heating cycle should be minimised to avoid zinc vaporisation.
• 875℃ (Solidus Melting) | 895℃ (Liquidus Melting) | ~910℃ (Recommended Brazing)*
• 1000mm Length | 2.5kg Weight | PAP 20 Tube Packaging
• Diameters = 2.5mm (XP50675) | 3.0mm (XP50676)
• Flux/paste not required.
XP BRAZE Cu 470 MC
• Cu BRAZE 470 is a copper-zinc, micro coated brazing alloy.
• Typically used on steel, nickel, and copper alloys specifically for brass and bronze welding applications.
• Due to the high zinc content, the heating cycle should be minimised to avoid zinc vaporisation.
• 875℃ (Solidus Melting) | 895℃ (Liquidus Melting) | ~910℃ (Recommended Brazing)*
• 500mm Length | 2.5kg Weight | PAP 20 Tube Packaging
• Diameters = 2.5mm (XP50678) | 3.0mm (XP50679)
• Flux/paste not required.
XP BRAZE Cu 773
• Cu BRAZE 773 is a high strength, corrosion resistant brass brazing alloy with the addition of nickel.
• Typically used in the joining of steel to steel or carbide to steel.
• Due to the high zinc content, the heating cycle should be minimised to avoid zinc vaporisation.
• 890℃ (Solidus Melting) | 920℃ (Liquidus Melting) | ~940℃ (Recommended Brazing)*
• 1000mm Length | 2.5kg Weight | PAP 20 Tube Packaging
• Diameters = 1.6mm (XP50682) | 2.4mm (XP50683) | 3.2mm (XP50684)
• Suitable for use with the XP FLUX CU1.
XP BRAZE Cu 773 MC
• Cu BRAZE 773 is a high strength, corrosion resistant, flux coated brass brazing alloy with the addition of nickel.
• Typically used in the joining of steel to steel or carbide to steel.
• Due to the high zinc content, the heating cycle should be minimised to avoid zinc vaporisation.
• 890℃ (Solidus Melting) | 920℃ (Liquidus Melting) | ~940℃ (Recommended Brazing)*
• 1000mm Length | 2.5kg Weight | PAP 20 Tube Packaging
• Diameters = 2.5mm (XP50686) | 3.0mm (XP50687)
• Flux/paste not required.
Copper-Phosphorus
Specifically formulated to deliver high-efficiency joining for copper-to-copper and copper-alloy applications, offering a unique "self-fluxing" capability that streamlines the brazing process. By incorporating a precise percentage of phosphorus, these alloys act as their own deoxidizing agent when used on pure copper, reducing both material costs and post-braze cleaning requirements. This product produces robust, vibration-resistant bonds that maintain structural integrity under thermal cycling, ensuring long-term reliability in pressurised systems while meeting the rigorous performance standards expected by professionals worldwide.
XP BRAZE CuP 179
• CuP BRAZE 179 is a copper-phosphorus brazing alloy.
• Typically used to join copper-to-copper or copper based base materials (e.g. bronze / brass).
• Copper-to-copper joints are self-fluxing due to the phosphorus content.
• 710℃ (Solidus Melting) | 890℃ (Liquidus Melting) | ~760℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50645) | 2.0mm (XP50647) | 2.5mm (XP50648) | 3.0mm (XP50649)
• Suitable for use with the XP FLUX CU1.
XP BRAZE CuP 182
• CuP BRAZE 182 is a copper-phosphorus brazing alloy.
• Typically used to join copper-to-copper or copper based base materials (e.g. bronze / brass)
• Copper-to-copper joints are self-fluxing due to the phosphorus content.
• 710℃ (Solidus Melting) | 770℃ (Liquidus Melting) | ~720℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50650) | 2.0mm (XP50651) | 2.5mm (XP50652) | 3.0mm (XP50653)
• Suitable for use with the XP FLUX CU1.
XP BRAZE CuP 279
• CuP BRAZE 279 is a silver-copper-phosphorus brazing alloy.
• Typically used to join copper-to-copper or copper based base materials (e.g. bronze / brass).
• Copper-to-copper joints are self-fluxing due to the phosphorus content.
• 645℃ (Solidus Melting) | 825℃ (Liquidus Melting) | ~740℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50655) | 2.0mm (XP50656) | 2.5mm (XP50657) | 3.0mm (XP50658)
• Suitable for use with the XP FLUX CU1.
XP BRAZE CuP 281
• CuP BRAZE 281 is a silver-copper-phosphorus brazing alloy.
• Typically used to join copper-to-copper or copper based base materials (e.g. bronze / brass).
• Copper-to-copper joints are self-fluxing due to the phosphorus content.
• 645℃ (Solidus Melting) | 815℃ (Liquidus Melting) | ~720℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50660) | 2.0mm (XP50661) | 2.5mm (XP50662) | 3.0mm (XP50663)
• Suitable for use with the XP FLUX CU1.
XP BRAZE CuP 284
• CuP BRAZE 284 is a silver-copper-phosphorus brazing alloy.
• Typically used to join copper-to-copper or copper based base materials (e.g. bronze / brass).
• Copper-to-copper joints are self-fluxing due to the phosphorus content.
• 645℃ (Solidus Melting) | 800℃ (Liquidus Melting) | ~705℃ (Recommended Brazing)*
• 500mm Length | 1kg Weight | PAP 20 Tube Packaging
• Diameters = 1.5mm (XP50665) | 2.0mm (XP50666) | 2.5mm (XP50667) | 3.0mm (XP50668)
• Suitable for use with the XP FLUX CU1.
* Temperature ranges are indicative only; actual as-welded conditions vary based on multiple factors.
View Available Parweld Consumables
Discover the range of Parweld Filler Metal Welding Consumables distributed in your market area via our Global Locator!
Or Subscribe to Parweld TV on YouTube to watch demonstrational videos on our Welding Inverter range!
