Personal Protective Equipment
PPE, Safety Clothing & Accessories From Parweld
The Parweld PPE range is a versatile and high-quality collection of safety gear manufactured to provide maximum protection without compromising on comfort or dexterity. Developed to withstand the rigours of the workshop, the selection encompasses everything from aluminium gauntlets to flame-retardant hoods. Central to this offering is the premium Panther PPE range, featuring the heavy-duty Panther PRO and Panther BLACK sub-brands, tailored specifically for high-performance welding and fabrication tasks.
Parweld PPE Icons
Glove & Gauntlets Icons
PPE Shield Icons
Wash & Care Icons
PPE Size Guide
Glove & Gauntlets Chart
For best results, refer to the sizing chart. Always measure your dominant hand. For example, if you are right-handed, measure your right hand using the guide below to determine the most suitable size.
Please note that hand measurements do not guarantee a perfect fit due to natural variations in hand shape and finger length. Some users may prefer gloves that are half or even a full size larger or smaller than their measured size for improved comfort. For tasks requiring high levels of precision or dexterity, a slightly closer fit is often preferred.
A =
Measure the tip of the middle
finger to the base of the Palm.
B = Measure across the middle of your palm as shown in the illustration.
Do not include the thumb in this measurement.
A =
Measure the tip of the middle
finger to the base of the Palm.
B = Measure across the middle of your palm as shown in the illustration.
Do not include the thumb in this measurement.
| GLOVE SIZE | HAND CIRCUMFERENCE (B) | HAND LENGTH (A) |
|---|---|---|
| S | 175 – 200mm 6.9 – 7.9" |
170 – 180mm 6.7 – 7.1" |
| M | 200 – 225mm 7.9 – 8.9" |
180 – 190mm 7.1 – 7.5" |
| L | 225 – 250mm 8.9 – 9.8" |
190 – 200mm 7.5 – 7.9" |
| XL | 250 – 275mm 9.8 – 10.8" |
200 – 210mm 7.9 – 8.3" |
| 2XL | 275 – 300mm 10.8 – 11.8" |
210 – 220mm 8.3 – 8.7" |
| 3XL | 300 – 325mm 11.8 – 12.8" |
220 – 230mm 8.7 – 9.1" |
PPE Body Apparel Chart
Sleeve Measurements
With your arms in a slightly bent position, measure from the centre of the back of your neck, along the length of your arm to the wrist.
Chest Measurements
Measure around your chest holding the measuring tape under your armpits.
Waist Measurements
Measure around your waist at the narrowest part.
Hip Measurements
Measure around your hips at the widest part.
Inside Leg Measurements
From a standing position, measure from your groin to your ankle.
| CLOTHING SIZE | CHEST | WAIST |
|---|---|---|
| M | 100 – 108cm 40 – 42" |
81 – 87cm 32 – 34" |
| L | 112 – 116cm 44 – 46" |
92 – 96cm 36 – 38" |
| XL | 120 – 124cm 48 – 50" |
101 – 108cm 40 – 42" |
| XXL | 120cm+ 52" |
112 – 127cm 44 – 50" |
| XXXL | 137cm+ 54" |
117 – 132cm 46 – 52" |
SKU Part Number Breakdown
PPE Category
Glove/Gauntlet ID
Glove/Gauntlet Size
PPE Category
Product ID
Product Size
PPE Category
Trouser Type
Trouser Waist Size (Inches)
Trouser Leg Length*
Safety Standards
Regulation (EU) 2016/425 (as assimilated into UK law) sets out the essential health and safety requirements that must be met before PPE products can be placed on the EU and GB market. The purpose of the legislation is to ensure safe and effective products are placed on the market by requiring manufacturers to show how their products meet the ‘essential health and safety requirements’. The Personal Protective Equipment (Enforcement) Regulations 2018 provide a system for the enforcement of the 2016 Regulation in the UK and the EU Regulation on Market Surveillance 2019/1020 enforces it within the EU and NI.
EN 388 is the European standard used to assess protective gloves against mechanical risks, providing a clear performance rating for abrasion, blade cut, tear, puncture and, where applicable, impact protection. Each glove is marked with a pictogram followed by a series of numbers and letters that indicate its performance levels in these tests, helping users quickly understand the level of protection offered.
EN ISO 13997 TDM cut test for more accurate cut-resistance assessment, ensuring gloves are correctly matched to real-world hazards. Overall, the standard gives manufacturers and users a consistent, reliable way to evaluate mechanical protection and select the right glove for the job.
This standard tests 6 separate mechanical performance measures of a glove, namely: abrasion resistance, blade cut resistance, tear resistance, puncture resistance, TDM cut resistance, and impact protection. Criteria A–D are mandatory, E & F are optional tests, and there are two methods for testing cut resistance (B: Circular disc method, or E: TDM Cut straight blade).
Abrasion Resistance
| Cycles | Rating |
|---|---|
| <100 | 0 |
| 100 | 1 |
| 500 | 2 |
| 2000 | 3 |
| 8000 | 4 |
Circular Blade Cut Resistance
| Factor | Rating |
|---|---|
| <1.2 | 0 |
| 1.2 | 1 |
| 2.5 | 2 |
| 5.0 | 3 |
| 10.0 | 4 |
| 20.0 | 5 |
Tear Resistance
| Newton | Rating |
|---|---|
| <10 | 0 |
| 10 | 1 |
| 25 | 2 |
| 50 | 3 |
| 75 | 4 |
Puncture Resistance
| Newton | Rating |
|---|---|
| <20 | 0 |
| 20 | 1 |
| 60 | 2 |
| 100 | 3 |
| 150 | 4 |
Straight Blade Cut Resistance
| Newton | Rating |
|---|---|
| ≥ 2 | A |
| ≥ 5 | B |
| ≥ 10 | C |
| ≥ 15 | D |
| ≥ 22 | E |
| ≥ 30 | F |
Impact Resistance
EN 407 is the European standard that defines the testing and performance requirements for gloves designed to protect against thermal risks such as heat, flames, and molten metal. It evaluates six key hazards with each test rated on a scale from 0 to 4, where higher scores indicate stronger protection. This standard specifies thermal performance for protective gloves against heat and/or fire. The nature and degree of protection is shown by a series of six performance level ratings.
Resistance to Flammability
| After Burn Time (s) | After Glow Time (s) | Rating |
|---|---|---|
| <20 | ∞ | 1 |
| <10 | <120 | 2 |
| <3 | <25 | 3 |
| <2 | <5 | 4 |
Resistance to Contact Heat
| Temp After 15s (°C) | Rating |
|---|---|
| 100° | 1 |
| 250° | 2 |
| 350° | 3 |
| 500° | 4 |
Resistance to Convective Heat
| Seconds | Rating |
|---|---|
| <4 | 1 |
| <7 | 2 |
| <10 | 3 |
| <18 | 4 |
Resistance to Radiating Heat
| Seconds | Rating |
|---|---|
| <5 | 1 |
| <30 | 2 |
| <90 | 3 |
| <150 | 4 |
Small Splashes of Molten Metal
| No. of Drops | Rating |
|---|---|
| ≥ 5 | 1 |
| ≥ 15 | 2 |
| ≥ 25 | 3 |
| ≥ 35 | 4 |
Large Splashes of Molten Metal
| Grams | Rating |
|---|---|
| 30 | 1 |
| 60 | 2 |
| 120 | 3 |
| 200 | 4 |
Defines the safety and performance requirements for welding gloves, combining the mechanical protection tests of EN 388:2016+A1:2018 and EN ISO 21420:2020+A1:2024 with the thermal protection requirements of EN 407 to ensure reliable defence against heat, sparks, molten metal, and mechanical hazards.
- Type A: Offers higher heat and mechanical protection for heavier welding tasks.
- Type B: Provides greater dexterity for precision work such as TIG welding.
The core European standard that defines general requirements for all protective gloves, ensuring they are safe, comfortable, and fit for purpose across all PPE categories. It sets out essential criteria for glove design and construction, material innocuousness, sizing, dexterity, and user documentation.
Ensures materials do not release harmful substances—such as excessive chromium VI, nickel, azo dyes, DMFa, or PAHs—and that gloves allow natural hand movement. It also introduces mandatory manufacturing dates and clear user instructions.
The Panther PPE line offers top-tier protective gear for industrial workshop applications. Known for its durability combined with comfort for the harshest of welding or cutting environments, Panther PPE offers a range of clothing from Gloves and Gauntlets to Aprons and Jackets, Sleeves and Spats to Specs and Eyewear. Premium PPE Accessories to offer protection against sparks, heat, abrasions, welding, grinding and cutting activities.
For the toughest jobs, Panther PRO PPE is made with premium ‘A’ Grade Leather to provide superior protection and extreme durability. Its professional design ensures maximum precision and control while withstanding intense welding, grinding, and cutting processes.
Combining stylish design with exceptional comfort and high-performance protection, the Panther BLACK PPE range is designed for the professional welder. Made with soft leather and an ergonomic construction, this sleek, all-black line ensures maximum dexterity and precision in challenging work environments. It's crafted to the highest standards of protection against heat, sparks, and welding hazards.
The Parweld XR Series is specifically engineered for versatile performance across welding, grinding, and cutting applications. Featuring a comprehensive selection of premium helmets and specialised visor accessories, the range is headlined by our PAPR Air Fed Units, providing certified TH3 respiratory protection. Ensure maximum comfort and compliance with an integrated system designed to withstand the rigors of the industrial workshop.
